Startup Window Setting - Canon MVX200 E Service Manual

2-4 Startup Window Setting

When user's original data are written over the initial default data of the start-up image or the sound, shutter, operation or self-timer
[User Setting] , the user's original data become a default data (replace the initial default data) after replacement of the MAIN P.C.B.
Note that the data thus written by the user is recognized as a non-original data. To avoid this, follow the next procedure.
Procedure)
How to save an original data to a PC and write it to the main unit:
(1) In the MyCamera window on the Zoom Browser EX, save original image data to a PC.
(2) Replace the MAIN P.C.B.
(3) In the MyCamera window, set the original image data saved at step (1) to the camera.
For details, refer to the DIGITAL VIDEO SOFTWARE INSTRUCTION MANUAL - "Customizing Your Camcorder with
the MyCamera Settings".
Note)
Only where the USB I/F is available for connection between the PC and main unit, it is allowed to save/write original data using the
Zoom Browser EX.
MVX250i E, MVX200i E, MVX200 E
8
SERVICE HINTS