Disassembly Of R-Lcd Unit - Canon MVX200 E Service Manual

MVX250i E, MVX200i E, MVX200 E
DISASSEMBLING

1-21 Disassembly of R-LCD Unit - 1

(1) Remove one screw (f × 1), and detach the Rubber Insulation and the Tripod Base.
(2) Remove one screw (e × 1), and detach the Hold Label and the GND Plate.
(3) Remove one screw (f × 1), disengage the claws A and B, and detach the LI Case.
<Notes on Reassembling>
(1) Attach the Hold Label to the position indicated in the figure below.
Note on Reassembling (1)
Hold Label GND Plate
(1)
Tripod Base
Craw A
(3)
(1)
(1) - f
Craw B
(2)
Rubber Insulation
(2) - e
(2)
LI Case
(3) - f
GND Plate
e f
Hold Label
4mm
5mm
Metal
Metal
M1.7
M1.7
(self tap)
(self tap)
Fig. 27
30