Wb Adjustment (3); Virtual Eeprom And Flash Memory Writing - Canon MVX200 E Service Manual

5-4-5 WB Adjustment (3)

CHART Light box (5600°K)
SPEC. Automatic adjustment
Procedure)
(1) Referring to the table shown below, carry out WB adjustment (3).
ST EP PROCEDURE
WB (3)
1 1) Make the setting shown at right.
2) Perform storing.
(press the PAUSE button.)

5-4-6 Virtual EEPROM and Flash Memory Writing

SPEC. Automatic writing
Procedure)
(1) According to the table shown below, write adjustment data (5-4-1 to 5-4-5) into the virtual EEPROM and flash memory.
ST EP PROCEDURE
EEPROM & FLASH WRIT ING
1 1) Make the setting shown at right.
2) Perform storing.
(press the PAUSE button.)
2 1) Make the setting shown at right.
2) Perform storing.
(press the PAUSE button.)
MONIT OR
CS Function MD ADDR DT
2 08 ST 3005 00
WR
↑ ↑ ↑ ↑
RD
↑ ↑ ↑
MONIT OR
CS Function MD ADDR DT
2 08 ST 3006 00
RD
↑ ↑ ↑
0 08 ST 0081 --
RD
↑ ↑ ↑ ↑
24
MVX250i E, MVX200i E, MVX200 E
SERVICE MODE · ADJUSTMENT
Microcomputer operation
ST
Adjustment is in progress.
05 Adjustment is completed.
Completion with ST :05 (ST :09 NG)
Microcomputer operation
ST
05 Completion of virtual EEPROM writing.
Completion with ST :05, ST :09 NG
Preparation for flash memory updating.
Execution of flash memory updating.