Canon MVX200 E Service Manual page 134

MVX250i E, MVX200i E, MVX200 E
DISASSEMBLING
1-22 Disassembly of R-LCD Unit - 2
(1) While being free from the GND Plate, disengage the dowels A and B and the claw C. Then, disconnect the CN102, and detach the
KEY P.C.B.
<Note on Reassembling>
(1) With the LCD Unit open, attach the KEY P.C.B. to the dowels A and B and the claw C. (Take care not to damage the Switch part.)
GND Plate
LCD Unit
(1)
Claw C
KEY P.C.B.
Dowel A
(1)
Dowel B
CN102
KEY P.C.B.
Note on Reassembling (1)
Dowel A GND Plate
Claw C
Switch part
KEY P.C.B. Dowel B
Fig. 28
31