Separation Of Cvf Unit - Canon MVX200 E Service Manual

1-9 Separation of CVF Unit

(1) Detach the Shoe Connector Ass'y. (MVX250i E only)
(2) Disconnect the CN891, and detach the ACS-MAIN FPC. (MVX250i E only)
(3) Remove three screws (k × 2, h × 1), and then detach the Shoe Base and GND Plate.
(4) Turn up the CVF Unit, remove one screw (h × 1), disconnect the CN1501, and demount the CVF Unit.
<Note on Reassembling>
(1) Before using a service part of GND Plate, attach the UL Tape to the position indicated in the figure below.
(2) Attach the GND plate to the Shoe Base as illustrated below.
MVX250i E only
Note on Reassembling (1)
A surplus part of the UL
Attachment
Tape shall be folded
reference
onto the back side.
UL Tape (9 × 25)
Attach the UL tape before reassembling.
Note on Reassembling (2)
Shoe Base
GND Plate
h k
2.5mm
3.5mm
Metal
Metal
M1.7
M1.7
ACS-MAIN FPC
GND Plate
(2)
(2)
Fig. 9
12
MVX250i E, MVX200i E, MVX200 E
(3) - k
(1)
Shoe Base
(3)
(3)
CVF Unit
(4) - h
CN891
DISASSEMBLING
Shoe Connector Ass'y
MVX250i E only
(3) - k (3) - h
GND Plate
(4)
(4)
CN1501