Canon MVX200 E Service Manual page 29

b. Audio signals
Types of signals
Impedance
Signal level
Frequency characteristic
Audio signal S/N
Built-in microphone input
External microphone input
6-7-3 S-Video terminal
Signal configuration
Video signals
Color signal
Impedance
Signal level
Brightness signal S/N
Horizontal resolution
Self recording / playback
Camera EE OUT
6-7-4 Headphone terminal
Output impedance
Signal level
6-7-5 USB terminal
USB device class
Compatible computer systems
PC operating system
6-8 Memory card system
6-8-1 Types of memory cards used
6-8-2 Recordable image types
a. Still image
In Camera mode
In Card Recording mode
During playback mode
b. Motion video
Image quality in recording onto card from tape / DV input
Source
Tape / DV input
Tape / DV input
Analog AV input
Stereo audio signal
Max. 3 kΩ
−10 dBv
60 Hz to 16 kHz (Range between 1 kHz standard ±3 dB)
Min. 48 dB
Min. 48 dB (However, the MVX200i E, MVX200 E model does not have an external micro-
phone input terminal.)
PAL Y/C separated video signal
1 Vp-p (brightness + synchronization signal)
0.3 Vp-p (Color burst signal)
75 Ω
0.3 Vp-p (Color burst signal)
Min. 45 dB
Conforms to camera EE OUT
Max. approx. 530 TV lines (screen center)
φ 3.5 mm stereo mini jack
100 Ω
−25 dBv (with 16 Ω load at maximum volume)
Supports USB2.0 FullSpeed class
Independent class, PTP class, mass storage class, audio class, video class
Windows : IBM PC/AT compatible, NEC PC98-NX Series
Macintosh : Power Macintosh, PowerBook, iMac, iBook
Windows : Windows 98, Windows 98SE, Windows ME, Windows 2000, Windows XP
Macintosh : Mac OS 9 or later
SD memory card, Multimedia card
JPEG recording
When [ ] Fine], or [ ] Normal] is selected for [PHOTO REC] on the [CAM SET UP]
menu, still images can be recorded on the memory card by operating the photo button while
motion video is being recorded on the tape. (Tape simultaneous recording function: VGA still
images)
Still image is recorded using the Photo button (image size and image quality are selectable).
Writing in Progress warning is displayed in the EVF/ LCD.
Still image is recorded using the photo button during tape playback (pressed halfway down for
still image playback and pressed all the way down for recording). (VGA still images)
Also, DV input images (when no tape loaded or loaded tape is stopped) can be recorded by
pressing the photo button (pressing halfway captures still image of the DV input, pressing all the
way down records the image).
AVI (Video data: Motion JPEG / Audio data: WAVE (monoaural))
Records only camera images during Card Record mode and from tape during VCR mode (re-
cording from DV input,
AV input and S- Video input are disabled).
Source recording system
Progressive or frame motion video recording
Normal motion video recording
Normal motion video recording
27
MVX250i E, MVX200i E, MVX200 E
GENERAL DESCRIPTION OF PRODUCT
Image recorded on card
Progressive or frame image
Simple pure frame image
Field image