Canon MVX200 E Service Manual page 142

1-29 Disassembly of Rear Cover Unit - 2
(1) Remove three screws (n × 2, q × 1), and detach the Power Switch Ass'y.
(2) Remove one screw (n × 1), and detach the Strap Plate.
(3) Remove one screw (n × 1), and detach the Eject Holder, the Spring, and the Eject Knob.
Note : Take care not to lose the Spring.
<Instruction for Supply>
Entire surface of Spring : Hanal FL-778 (DY9-3026-010)
Instruction for Supply
Spring
Hanal FL-778
Power Switch Ass'y
(1) - q
(1) - n
(1) - n
Strap Plate
(2)
(2) - n
(1)
(3) - n
Fig. 36
39
MVX250i E, MVX200i E, MVX200 E
Rear Cover
(3)
Spring
Eject Holder
n
4.5mm
Metal
M1.7
(self tap)
(self tap)
DISASSEMBLING
Eject Knob
q
5.5mm
Metal
M1.7