Canon MVX200 E Service Manual page 27

Table of Contents

Advertisement

5-13 Built-in microphone
5-13-1 Wind screen function
5-14 Auxiliary light (MVX250i E, MVX250i E only)
5-14-1 Lighting mode
5-15 Other additional functions
5-15-1 Time code
5-15-2 Data code
a. Time and date
b. Camera data
5-15-3 Accessory shoe
5-15-4 REC Search mechanism
5-15-5 REC Review
5-15-6 Zero Set Memory
5-15-7 Remote control reception ON/OFF Possible. This can be done in Camera mode and VCR mode (by selecting from menu).
5-15-8 Headphone volume adjustment
5-15-9 16:9 shooting
5-15-10 AEB shooting
5-15-11 Skin detail mode
5-15-12 Still image check time setting
6 Recorder
6-1 Recording functions
6-1-1 Recording format
6-1-2 Tape speed
6-1-3 DV input recording
6-1-4 Analog input recording
6-1-5 Priority of terminals during recording DV terminal > S-Video terminal > AV terminal (MVX250i E, MVX200i E only)
6-2 Audio Dubbing Recording
6-2-1 Insert-capable tape
Stereo using electret condenser microphone
Supported ; AUTO or OFF can be selected (Selected from menu. However, built-in microphone
only.)
Equipped with white LED
Night+ mode
: LED is forcibly lighted.
Super Night mode : LED lights depending on brightness of the subject.
Displays recording time (0:00:00 to 7:59:59) and records in sub-code area.
The date and camera information during recording are automatically recorded and can be dis-
played during playback.
Automatic calendar range: January 1, 2004 through December 31, 2030 (the initial setting is
January 1, 2004)
One of the following three formats can be selected for the date / time display.
World clock capability (select the name of your destination city and the date and time are auto-
matically adjusted to the local date and time.) Supports daylight savings time.
During playback, time can be displayed in three different modes (date only, time and date, or
time only). (Time and date can be displayed for January 1, 1990 through December 31, 2089.)
Shutter speed and aperture value information are recorded (but not displayed during recording),
and can be displayed during playback.
Supported. Advanced accessory shoe supported (MVX250i E only)
Supported. Tape can be played (forward or reverse) by pressing the REC Search button while
camera recording is paused. (When REC Search ends, camera recording is paused again.)
Supported. Accessed by operating the Recording Check button when camera recording is paused
(in Tape mode only).
Supported. This function allows you to rewind or fast-forward the tape to the position where the
WL-D83 Zero Set Memory key is pressed (the counter value is set to 0:00:00). (During record-
ing, only zero setting is allowed. This function can be used in Playback mode.) "
appears at the far right of the counter.
Possible. Adjustable with SET button
High- resolution 16: 9 (CCD extraction equivalent to approx. 790,000 pixels when image stabi-
lizer is ON or CCD extraction equivalent to approx. 920,000 pixels when image stabilizer is
OFF). If 16: 9 mode is selected, the screen switches to a letterbox display (with black bands
(masked) at the top and bottom)). In Tape mode only
Included. (First shot : No correction, Second shot : -0.5 level, Third shot : +0.5 level)
When skin areas are detected, they are expressed softly, and the small blemishes, lines, etc.
become unnoticeable. ON or OFF setting possible.
The time used for checking still images can be set after the photo button is pressed and its
operation is released. One of 6 settings; OFF (0 sec), 2, 4, 6, 8 or 10 seconds can be selected as
the setting mode.
Camera shooting and recording, DV input recording**, analog input recording
** : MVX250i E, MVX200i E only
Consumer electronics digital DVC (SD specs)
Approx. 18.83 mm / second (in SP mode), approx. 12.57 mm / second (in LP mode)
Complies with IEEE1394.
Records video / audio signals from a digital video camera connected through a DV cable.
Records analog video / audio signals using an S-Video terminal or AV terminal.
(MVX250i E, MVX200i E only)
Possible. (SD spec tapes only)
Only tapes with 12- bit/ SP recording (other than 4- channel simultaneous recording) can be used
in Audio Dubbing Recording.
25
MVX250i E, MVX200i E, MVX200 E
GENERAL DESCRIPTION OF PRODUCT
" display
M

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mvx200i eMvx250i e

Table of Contents