Disassembly Of Lcd Unit - Canon MVX200 E Service Manual

1-25 Disassembly of LCD Unit - 1

(1) Turn the LCD Hinge Unit through an angle of 90º, and remove two screws (g × 2).
(2) Disengage the claws A, B, C and D in that order, and detach the LCD Top Cover.
Note : Take care not to damage the claw hooking parts E and F of the LCD Bottom Cover.
(3) Disconnect the CN901 and CN903, and then detach the LCD Hinge Unit and the LCD DETECT FPC.
<Note on Reassembling>
(1) Attach the LCD Top Cover as illustrated below.
(1)
LCD Hinge Unit
(1) - g
(1) - g
LCD Top Cover
Note on Reassembling (1)
Insert the IC part of the DETECT FPC
into the groove.
LCD DETECT FPC
(3)
Claw A
Claw B
Fold a surplus part of the flexible cable inside.
Fig. 31
34
MVX250i E, MVX200i E, MVX200 E
(3)
CN903
(3)
(3)
(2)
CN901
Claw C
Claw D
DISASSEMBLING
E
F
g
4mm
Metal
M1.7