Camera Section Adjustment; Iris Adjustment - Canon DC10 E Service Manual

5-6 Camera Section Adjustment

Notes)
(1) Each adjustment data (5-6-1 to 5-6-5) becomes effective after it is written into the DATA as mentioned in 5-6-6. If power must be
turned OFF/ON during each adjustment, be sure to perform the DATA write procedure as mentioned in 5-6-6.
(2) Be sure to carry out adjustments 5-6-2 through 5-6-5 as sequenced in succession. Remember that satisfactory performance will not
be attained by performing just one of these adjustments.
Preparation)
(1) For camera section adjustment, take the product condition.
(2) Adjustment condition (initial condition)
Movie/Still
Shooting mode
AF
Image stabilizer
Chart
AE
IMAGE EFFECT

5-6-1 Iris Adjustment

CHART Light box (5600°K) not required
SPEC. Automatic adjustment.
Procedure)
(1) Referring to the table shown below, adjust the Iris.
ST EP PROCEDURE
IRIS
1 1) Make the setting shown at right.
2) Perform storing.
(press the PAUSE button.)
: Movie
: Program AE
: OFF
: OFF
: Standard angle of view
: P mode
: OFF
MONIT OR
CS Function MD ADDR DT
2 08
WR
ST
Fig. 22
Microcomputer operation
ST 3000 --
Adjustment is in progress.
RD Adjustment is completed.
Completion with ST :00 (Others, NG)
31
DC10 E, DC20 E
SERVICE MODE / ADJUSTMENT