Commissioning / Service - Aop Settings - Siemens SINAMICS GM150 Operating And Installation Instructions

Motor identification
This function has not yet been implemented and will be made available at a later point in time.
Resetting the fan runtime
In this menu, you can reset the fan counter. The fan counter must be reset after a fan
replacement.
1. Press the <▼> function key to select the "Reset runtime" row.
2. Confirm the selection with <OK>. The reset of the fan runtime also clears alarm A30042.
8.2.3.6

Commissioning / Service - AOP settings

Commissioning /Service / AOP settings menu structure
Figure 8-12
Calling up AOP settings
1. Press the <<MENU>> key.
2. Press the <▼> function key to select the "Commissioning/Service" row. Press the <OK>
3. Press the <▼> function key to select the "AOP settings" row. Press the <OK> function key
4. Press the ▲ or ▼ function key to select the desired setting. Press the <OK> function key to
SINAMICS GM150 6SL3815-2LN41-4AA2
Operating Instructions 04/2017
Commissioning /Service / AOP settings menu structure
function key to confirm the selection.
to confirm the selection.
confirm the selection.
8.2 Operation via the AOP30 operator panel
Operation
153