DURKOPP ADLER M-Type Delta D867 Operating Instructions Manual page 116

Icon Parameter
Stitch length
Needle thread tension
Sewing foot pressure
Max. sewing speed
114
Programming Commander DELTA
Setting
The stitch length changes slightly
depending on the material thickness.
For this reason, the stitch length can
be adjusted to different material
thicknesses by the software.
Depending on the material thickness,
the needle thread tension can be
adjusted to different material
thicknesses by the software.
The sewing foot pressure can be
adjusted to different material
thicknesses by the software.
The maximum sewing speed can
be adjusted to different material
thicknesses by the software.
Operating Instructions M-TYPE DELTA - 01.0 - 08/2019