DURKOPP ADLER M-Type Delta D867 Operating Instructions Manual page 97

Programming Commander DELTA
Operating Instructions M-TYPE DELTA - 01.0 - 08/2019
Setting options Needle thread tension
Menu item Setting 1
linear Needle thread tension
Value range 00 – 99
Min. Material
thickness
Value range 00.0 – 10.0 [mm]
Max. Material
thickness
Value range 00.0 – 10.0 [mm]
2.OnOff Min. Material
thickness
Value range 00.0 – 10.0 [mm]
2.On Min. Material
thickness
Value range 00.0 – 10.0 [mm]
Setting options Sewing foot pressure
Menu item Setting 1
linear Sewing foot pressure
Value range 00 – 20
Min. Material
thickness
Value range 00.0 – 10.0 [mm]
Max. Material
thickness
Value range 00.0 – 10.0 [mm]
Setting 2
Maximum needle thread
tension reached at the
upper material thickness
limit.
Material thickness at which
the increase in needle
thread tension should start.
Material thickness up to
which the increase in
needle thread tension
should occur.
Material thickness from
nd
which the 2 needle
thread tension should be
used.
Material thickness from
nd
which the 2 needle
thread tension should be
used.
Setting 2
Maximum sewing foot
pressure reached at the
upper material thickness
limit.
Material thickness at which
the increase in sewing foot
pressure should start.
Material thickness up to
which the increase in
sewing foot pressure
should occur.
95