Sewing Backwards With The Stitch Regulator (Optional); Setting Quick Stroke Adjustment (Optional) - DURKOPP ADLER M-Type Delta D867 Operating Instructions Manual

44
4.11 Sewing backwards with the stitch regulator
(optional)
The electronic stitch regulator on the machine arm reduces the
stitch length down to sewing backwards in the lower end position.
Fig. 22: Sewing backwards with the stitch regulator
①
(1) - Stitch regulator
1. Slowly push the stitch regulator (1) down.
 The stitch length becomes smaller. In the lower end position,
the machine sews backwards with the set stitch length.

4.12 Setting quick stroke adjustment (optional)

On machines equipped with a knee button, the knee button can
be used to switch on the increased sewing foot stroke.
You can assign functions to the knee button in the software using
the control panel of the machine.
Operating Instructions M-TYPE DELTA - 01.0 - 08/2019
Operation