Switching On And Off The Machine - DURKOPP ADLER M-Type Delta D867 Operating Instructions Manual

20
4.2

Switching on and off the machine

Fig. 2: Switching on and off the machine
①
(1) - Button
Switching on the machine
To switch on the machine:
1. Press the switch (2) on the rear of the control to position I.
 The button (1) on the front of the control illuminates red.
2. Tap the button (1) on the front of the control.
 The control and the control panel of the machine start up.
3. Press the pedal backwards when prompted to do so on
the display.
 The machine performs a reference run and is afterwards
ready for sewing.
Switching off the machine
To switch off the machine:
1. Press the button (1) on the front of the machine.
 Control and control panel shut down and are set to standby;
the button (1) illuminates red.
2. If necessary, press the switch (2) on the rear of the control
to position O.
 The machine is no longer set to standby.
Operating Instructions M-TYPE DELTA - 01.0 - 08/2019
②
(2) - Switch
Operation