DURKOPP ADLER M-Type Delta D867 Operating Instructions Manual page 126

124
Setting options Needle thread tension
Menu item Setting 1
linear Needle thread tension
Value range 00 – 99
Min. Material thickness
Value range 00.0 – 10.0 [mm]
Max. Material thickness
Value range 00.0 – 10.0 [mm]
2.Value Min. Material thickness
Value range 00.0 – 10.0 [mm]
On/Off
2. Value On Min. Material thickness
Value range 00.0 – 10.0 [mm]
Setting options Sewing foot pressure
Menu item Setting 1
linear Sewing foot pressure
Value range 00 – 20
Min. Material thickness
Value range 00.0 – 10.0 [mm]
Max. Material thickness
Value range 00.0 – 10.0 [mm]
Operating Instructions M-TYPE DELTA - 01.0 - 08/2019
Programming Commander DELTA
Setting 2
Maximum needle
thread tension reached
at the upper material
thickness limit.
Material thickness at
which the increase in
needle thread tension
should start.
Material thickness up to
which the increase in
needle thread tension
should occur.
Material thickness from
which the 2
thread tension should
be used.
Material thickness from
which the 2
thread tension should
be used.
Setting 2
Maximum sewing foot
pressure reached at
the upper material
thickness limit.
Material thickness at
which the increase in
sewing foot pressure
should start.
Material thickness up
to which the increase in
sewing foot pressure
should occur.
nd
needle
nd
needle