DURKOPP ADLER M-Type Delta D867 Operating Instructions Manual page 48

46
Functions of the buttons
Button Function
Sewing backwards
When this button is activated, the machine sews in
reverse.
Needle position
When this button is activated, the needle moves to a
specific position.
This position is determined individually via the parameter
settings. For more information, refer to the  Service
Instructions.
The machine comes configured so that selecting the
button will bring the needle up to the top dead center.
Bartack suppression
This button cancels the general setting for sewing start
and end bartacks. If bartacks are on, pressing the button
skips the next bartack. If bartacks are off, pressing the
button sews the next bartack.
Stitch length
When this button is selected, the machine sews with the
greater stitch length that was programmed for this stitch
length on the control panel.
Additional value needle thread tension
+/– +/–
When this button is selected, the machine sews with
the programmed additional thread tension.
Fully customizable
The button is fully customizable.
The machine comes configured so that a press of
the button will switch on the underarm lighting.
Operating Instructions M-TYPE DELTA - 01.0 - 08/2019
Operation