Troubleshooting; Customer Service; Messages Of The Software - DURKOPP ADLER M-Type Delta D867 Operating Instructions Manual

Troubleshooting

Code Type
1000 Error
1001 Error
1002 Error
Operating Instructions M-TYPE DELTA - 01.0 - 08/2019
10 Troubleshooting

10.1 Customer Service

Contact for repairs and issues with the machine:
Dürkopp Adler AG
Potsdamer Str. 190
33719 Bielefeld, Germany
Tel. +49 (0) 180 5 383 756
Fax +49 (0) 521 925 2594
Email: service@duerkopp-adler.com
Internet: www.duerkopp-adler.com

10.2 Messages of the software

Possible cause
Sewing motor encoder
plug (Sub-D, 9-pin) not
connected
Sewing motor error
Sewing motor plug (AMP) not
connected
Sewing motor insulation error
Remedial action
• Connect encoder cable to the
• control, use correct connection
• Check connection and plug in
• Test sewing motor phases (R = 2.8Ω,
high impedance to PE)
• Replace encoder
• Replace sewing motor
• Replace control
• Check motor phase and PE for
low-impedance connection
• Replace encoder
• Replace sewing motor
173