Removing The I/O Module; Figure 10: Removing The I/O Module - WAGO 750 Series Manual

40 Mounting
With the I/O module snapped in place, the electrical connections for the data
contacts and power contacts (if any) to the fieldbus coupler/controller or to the
previous or possibly subsequent I/O module are established.
Pos : 73.11 /Serie 750 ( WAGO-I/O-SYST EM)/Monti eren/Bus kl emme entfer nen @ 4\mod_1239169375203_21.doc x @ 30334 @ 3 @ 1
6.2.2

Removing the I/O Module

1. Remove the I/O module from the assembly by pulling the release tab.

Figure 10: Removing the I/O module

Electrical connections for data or power contacts are disconnected when removing
the I/O module.
Pos : 74 /D okumentation allgemei n/Glieder ungs elemente/---Seitenwechs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1
WAGO-I/O-SYSTEM 750
750-652 Serial Interface RS-232 / RS-485
Manual
1.2.0