48
Commissioning
The parameter dialog is divided into the following areas:
Title bar with item and item number of the selected I/O module, info area with
item number, designation, and version number and version date of the I/O
module,
Toolbar (1),
parameter range (2) and
status bar (3).
Status reports are output in the status display in the lower area of the configuration
dialog.
Pos : 82.2 /Serie 759 (WAGO-Softwar e)/WAGO-I/O-CHEC K/750- 0652 Seriell e Schnittstelle R S-232/RS- 485_Datenaus tausc hSeriell e Schnittstelle R S-232/RS- 485 750- 0652 (Symbolleiste) @ 14\mod_1361196248892_21.doc x @ 112207 @ 3 @ 1
8.1.2
Toolbar on the Configuration Dialog
The toolbar contains the following buttons:
Figure 18: Toolbar
Table 22: Toolbar
Button
Function
Description
Closes the active window. If you have changed
Exit
settings, you will be asked to save these values in
the I/O module.
Opens a file with saved parameters. WAGO-I/O-
Open
CHECK shows the Open File dialog.
Saves the current parameters in a file. WAGO-I/O-
Save
CHECK shows the Save File dialog.
Reads the current settings from the connected I/O
Read
module.
Writes the current parameters to the selected I/O
Write
module.
Factory
Overwrites the locally-saved configuration and
settings
parameterization with factory settings.
WAGO-I/O-SYSTEM 750
750-652 Serial Interface RS-232 / RS-485
Manual
1.2.0