Installing The Hk-Psu02; Installing The Hk-Psu03 - Sony CCP-8000 Installation Manual

2-2. Installing the HK-PSU02

2-3. Installing the HK-PSU03

2-2. Installing the HK-PSU02
c
Before installing the backup power supply unit HK-PSU02
in MKS-8010A, set the POWER switch of HK-PSU02 to
the "O" position (OFF).
Installation
1. Turn off the main power of the MKS-8010A and
disconnect the AC power cord from the outlet.
2. Remove the front panel. (Refer to Section 2-1.)
3. Remove the two screws that fix the blank panel to the
HK-PSU02 installation location, and remove the blank
panel.
PSW3 x 6
PSW3 x 6
n
Store the removed blank panel in a safe place.
4. Insert the HK-PSU02 securely into the deep end.
5. Secure the HK-PSU02 with the two screws.
Indicator
HK-PSU02
PSW3 x 6
Handle
6. Reinstall the front panel.
2-2
Blank panel
2-3. Installing the HK-PSU03
c
Before installing the backup power supply unit HK-PSU03
in MKS-8010, set the POWER switch of HK-PSU03 to the
"O" position (OFF).
Installation
1. Turn off the main power of the MKS-8010 and
disconnect the AC power cord from the outlet.
2. Remove the front panel. (Refer to Section 2-1.)
3. Remove the two screws that fix the blank panel to the
HK-PSU03 installation location, and remove the blank
panel.
B3 x 5
Blank panel
n
Store the removed blank panel in a safe place.
4. Insert the HK-PSU03 securely into the deep end.
5. Secure the HK-PSU03 with the two screws.
B3 x 5
HK-PSU03
6. Reinstall the front panel.
CCP-8000 IM