Replace The Resync-Unit Of A Solaris Ld Tile - Barco Solaris LD 120-8 Installation & Service Manual

9. Servicing
Image 9-9
Remove the tiles one by one out of the row.

9.7 Replace the resync-unit of a Solaris LD tile

Necessary tools
Flat blade screw driver.
How to replace the resync-unit ?
1. Release the two captive screws of the resync-unit as illustrated. Use a flat blade screw driver. (image 9-10)
2. Pull out the resync-unit.
3. Place a new resync-unit and fasten the captive screws.
Image 9-10
Replace the resync-unit.
70 R5976773 SOLARIS LD DISPLAY 02/12/2004