Table of Contents
Advertisement
Ceiling, wall or floor mount adapter
Depending on the mounting configuration of the Solaris LD display a different mounting adapter is used.
•
A ceiling mount adapter is used in case of a suspended Solaris LD display. This adapter consist in two big eye bolts which
need to be attached on top of the support structure.
•
A wall mount adapter is used in case of a wall mounted Solaris LD display. This adapter consist in two hooks, attached to the
wall, wherein the support structure hooks in.
•
A floor mount adapter is used in case of a freestanding Solaris LD display. This adapter consist in two feet on which the support
structure is built.
Image 3-10
Left: Ceiling mount adapter. Middle: wall mount adapter. Right: floor mount adapter.
Mounting accessories for Solaris D2 digitizer and power box
Every Solaris LD display is delivered with mounting accessories for the Solaris D2 digitizer and mono phase power box. These
mounting accessories allows easy attachment of the digitizer and power box to the support structure.
Image 3-11
Left: mono phase power box adapter plate. Right: Solaris D2 digitizer support brackets.
Cladding
Barco provides a cladding system for a finishing touch of the sides and the rear of the Solaris LD display. This cladding system exist
in painted metal plates and support brackets for attachment. The size and the number of the metal plates vary depending on the
chosen Solaris LD model and the chosen mounting configuration.
A
Image 3-12
Support brackets for side cladding (A), top- bottom cladding (B), rear cladding (C) and foot cladding (D).
R5976773 SOLARIS LD DISPLAY 02/12/2004
B
C
3. System overview
D
13
Advertisement
Table of Contents
