Related Manuals for Barco MDRC-2122 WP
Summary of Contents for Barco MDRC-2122 WP
-
Page 1: User Guide
Eonis User Guide 22–inch clinical display MDRC-2122 WP MDRC-2122 BL K5903049/01 19/02/2014... - Page 2 Barco nv President Kennedypark 35, 8500 Kortrijk, Belgium Phone: +32 56.23.32.11 Fax: +32 56.26.22.62 Support: www.barco.com/esupport Visit us at the web: www.barco.com Printed in Belgium...
-
Page 3: Table Of Contents
Table of contents TABLE OF CONTENTS 1. Welcome! ..................3 About the product .................... . 3 Symbols . - Page 4 Table of contents K5903049 EONIS 19/02/2014...
-
Page 5: Welcome
The multi- ple mounting options and connections further add to the smart design typical of Barco’s Eonis display. Most unique, however, is the excellent cleanability of the white Eonis display thanks to the toughened and scratch-proof glass. -
Page 6: Symbols
1. Welcome! Symbols Symbols in this document The following symbols are used in this document: Caution Warning Info, term definition. General info about the term Note: gives extra information about the described subject Tip: gives extra advice about the described subject What’s in the box Overview Your Eonis display comes with:... -
Page 7: Parts, Controls And Connectors
2. Parts, controls and connectors 2. PARTS, CONTROLS AND CONNECTORS Front view Overview Image 2-1 1. Front sensor 2. USB downstream connector 3. Left / Decrease key 4. Right / Increase key 5. Menu / Enter key 6. Standby key 7. -
Page 8: Rear View
2. Parts, controls and connectors Rear view Overview 10 11 Image 2-2 1. Connector compartment cover 2. Kensington security slots 3. Opening for cable routing strap 4. Height mechanism lock screw 5. VGA input 6. HDMI audio line out 7. USB downstream connector 8. -
Page 9: Display Installation
3. Display installation 3. DISPLAY INSTALLATION Unlocking the height mechanism To unlock the height mechanism In the factory, the height mechanism in the stand of your Eonis display is locked to prevent damage dur- ing transportation. You’ll first have to unlock this mechanism before you can adjust your display height position. -
Page 10: Removing The Cover
3. Display installation Image 3-2 Do not try to pivot your display when attached to the stand. Trying to do so AUTION could cause serious damage to your display and its stand. Removing the cover To remove the connector compartment cover The connector compartment cover should be removed to get access to the connectors. -
Page 11: Re-Attaching The Cover
3. Display installation 4. Connect the supplied external DC ( ) power supply to the +12 VDC power input of your display. 5. Plug the other end of the external DC ( ) power supply into a grounded power outlet by means of the proper power cord delivered with your display. -
Page 12: Kensington Security Slots
3. Display installation 3. Wrap and fix the cable routing strap around all cables. Image 3-6 Kensington security slots To make use of the Kensington security slots Your Eonis display has 2 Kensington slots available which allow you to secure the display to a desk or any other fixed object. - Page 13 3. Display installation Image 3-8 Use an arm that can support a weight of at least 12 kg (26.50 lbs). Failure to AUTION do so could make the panel fall, causing serious injury to a child or adult, and serious damage to the equipment.
- Page 14 3. Display installation K5903049 EONIS 19/02/2014...
-
Page 15: Daily Operation
To ensure optimal product quality, Barco applies strict selection criteria for its LCD panels. To learn more about LCD technology and missing pixels, consult the dedicated white papers available at www.barco.com/healthcare. -
Page 16: On/Off Switching
4. Daily operation On/Off switching To switch your display on or off 1. Shortly press the Standby ( ) key. Bringing up the OSD menus About the OSD menu The OSD menu allows you to configure different settings to make your Eonis display fit your needs within your working environment. -
Page 17: Advanced Operation
5. Advanced operation 5. ADVANCED OPERATION Video input source selection About video input source selection By default, your Eonis display automatically detects and shows the connected video input source. How- ever, when for instance more then one video input source is connected, it may be needed to manually select the input source to be displayed. -
Page 18: Ambient Light Reading Room Selection
DICOM: DICOM (Digital Imaging and Communications in Medicine) is an international standard that was developed to improve the quality and communication of digital images in radiology. In short, the DICOM gamma function results in more visible grayscales in the images. Barco recommends selecting the DICOM gamma function for most medical viewing applications. -
Page 19: Analog Video Settings
5. Advanced operation To select the white point 1. Bring up the OSD main menu. 2. Navigate to the Adjustments menu. 3. Enter the White Point submenu. 4. Select one of the available white point presets. Analog video settings The following settings are only available when VGA video input source is selected. About analog video settings When the VGA video input source is active, a number of analog video settings will become available: •... -
Page 20: Power Status Led
5. Advanced operation 2. Navigate to the Adjustments > Settings menu. 3. Enter the Language submenu. 4. Select one of the available languages. Power status LED About the power status LED By default, the power status LED has the following behavior: •... -
Page 21: Self Calibration Frequency
5. Advanced operation 5.10 Self calibration frequency About self calibration The front sensor of your Eonis display measures the output luminance of your screen and allows the display to automatically stabilize its luminance for maximum image quality over the displays’ lifetime. This self calibration is done at an adjustable, predefined frequency: •... - Page 22 5. Advanced operation K5903049 EONIS 19/02/2014...
-
Page 23: Cleaning Your Display
6. Cleaning your display 6. CLEANING YOUR DISPLAY Cleaning instructions To clean the display Clean the display using a sponge, cleaning cloth or soft tissue, lightly moistened with a recognized clean- ing product for medical equipment. Read and follow all label instructions on the cleaning product. In case of doubt about a certain cleaning product, use plain water. - Page 24 6. Cleaning your display K5903049 EONIS 19/02/2014...
-
Page 25: Important Information
7. Important information 7. IMPORTANT INFORMATION Safety information General recommendations Read the safety and operating instructions before operating the device. Retain safety and operating instructions for future reference. Adhere to all warnings on the device and in the operating instructions manual. Follow all instructions for operation and use. -
Page 26: Power Cords
IP-x level for MDRC-2122 BL: Ordinary IP-x level for MDRC-2122 WP: Protection glass, IP32 Ventilation Do not cover or block any ventilation openings in the cover of the set. When installing the device in a cupboard or another closed location, heed the necessary space between the set and the sides of the cupboard. -
Page 27: Environmental Information
Sweden: "Apparaten skall anslutas till jordat uttag" Essential performance Barco states that the Eonis display is only used for reviewing medical digital images. These reviews are done in rooms where the equipment is unlikely to be in contact with patients. With this information, if the display fails, the patient is not in direct danger for harm. - Page 28 “Electronic Information Products Pollution Control Labeling Standard” of Chinese Mainland, marked with the Environmental Friendly Use Period (EFUP) logo. The number inside the EFUP logo that Barco uses (please refer to the photo) is based on the “Standard of Electronic Information Products Environmental Friendly Use Period”...
-
Page 29: Regulatory Compliance Information
7. Important information Regulatory compliance information Indications for use This display is an AMLCD display designed for viewing medical X-ray images. This unit should not be used near patients (where patients are likely to be in unconscious condition) and should be kept outside of 1.83 m perimeter and 2.29 m vertical. - Page 30 7. Important information Emissions test Electromagnetic environment – Compliance Guidance RF emissions Class B The Eonis display is suitable for use in all establishments, CISPR 11 including domestic establishments Harmonic emissions Class D and those directly connected to IEC 61000-3-2 the public low-voltage power Voltage fluctuations/ flicker Complies...
- Page 31 7. Important information Immunity test Electromagnetic IEC 60601 Compliance level environment – Test levels guidance Voltage dips, short Mains power quality < 5% U (> 95% dip in < 5% U (> 95% dip in interruptions and voltage ) for 0.5 cycle ) for 0.5 cycle should by that of a typical variations on power...
- Page 32 7. Important information Immunity test Electromagnetic IEC 60601 Compliance level environment – Test levels guidance level in each frequency range. Interference may occur in the vicinity of equipment marked with symbol: At 80 MHz and 800 MHz, the higher frequency range applies. These guidelines may not apply in all situations.
-
Page 33: Explanation Of Symbols
7. Important information These guidelines may not apply in all situations. Electromagnetic propagation is af- fected by absorption and reflection form structures, object and people. Explanation of symbols Symbols on the device On the device or power supply, you may find the following symbols (nonrestrictive list): Indicates compliance with the Directive 93/42/EEC as Class I device Indicates compliance with the Directive 93/42/EEC as Class II device Indicates compliance with Part 15 of the FCC rules (Class A or Class B) - Page 34 7. Important information Indicates the manufacturing date Indicates the temperature limitations for the device to safely operate within specs Indicates the device serial no. Warning: dangerous voltage Caution Consult the operating instructions Indicates this device must not be thrown in the trash but must be recycled, according to the European WEEE (Waste Electrical and Electronic Equipment) directive Indicates Direct Current (DC)
-
Page 35: Legal Disclaimer
Barco software products are the property of Barco. They are distributed under copyright by Barco N.V. or Barco, Inc., for use only under the specific terms of a software license agreement between Barco N.V. or Barco Inc. and the licensee. No other use, duplication, or disclosure of a Barco software product, in any form, is authorized. - Page 36 7. Important information Active screen size (H x V) 267,3 mm x 475,2 mm (10.52” x 18.71”) Aspect ratio (H:V) 16:9 Resolution 2MP (1920 x 1080) Pixel pitch 0.2475 Color imaging Gray imaging Color support 10 bit; 16,7 million colors Viewing angle (H, V) 178°...
- Page 37 2000 m Storage altitude 7500 m Operating pressure 70 kPa - 106 kPa Storage pressure 50 kPa - 106 kPa MDRC-2122 WP Product acronym MDRC-2122 WP Screen technology TFT Color LCD IPS Active screen size (diagonal) 542 mm (21.5”) Active screen size (H x V) 267,3 mm x 475,2 mm (10.52”...
- Page 38 7. Important information Power management DPMS Dot clock 165 MHz OSD languages English, French, German, Spanish, Italian, Dutch, Japanese, Traditional Chinese, Simplified Chinese, Korean Dimensions with stand (W x H 507 x 377–457x 166 mm x D) Dimensions w/o stand (W x H 507 x 306 x 57 mm x D) Dimensions packaged (W x H...