Table of Contents
Advertisement
5. Installation procedures
Image 5-46
Install top and bottom cladding support brackets.
H
Image 5-47
Install side cladding support brackets.
5.13 Installation of the top and bottom cladding
What needs to be done ?
The top and bottom cladding plates have to be installed upon previous installed support brackets at the top and the bottom of the
Solaris LD display. The top as well as the bottom cladding consist of three cladding plates. One middle cladding plate and two corner
cladding plates. The middle cladding plate vary in length depending on the Solaris LD model. Depending on the chosen mounting
configuration the corner cladding plates have on some places a different cut out to fit around the feet are ceiling mount adapter.
The cladding plates are U-shaped. One leg of the U-shaped cladding plates contains teeth which fits in the slots at the top and
bottom front side of the precision frames. Note that the left and right corner cladding plates are not the same but each other's mirror
image. So, attention must be paid to select the right corner cladding plate for the right corner of the display.
50
F
G
R5976773 SOLARIS LD DISPLAY 02/12/2004
Advertisement
Table of Contents
