Table of Contents
Advertisement
Image 5-35
Attach the digitizer support brackets
Image 5-36
Install the Solaris D2 digitizer. Fan opening must be facing the rear of the display.
5.9 Installation of all the Solaris LD tiles
What has to be done ?
Fill up the precision frames with Solaris LD tiles. Note that the top and bottom row of tiles where installed simultaneously with the
precision frames. The rest of the tiles are inserted one by one, column by column starting in the middle of the display. It's important
to follow the installation sequence of tiles showed in the image below, especially when there is no back access to the display (e.g.
wall mount configuration). In this case the cabling has to be done simultaneously as well. Note that in case of no back access the
Solaris D2 digitizer must be installed before filling up the display with tiles.
R5976773 SOLARIS LD DISPLAY 02/12/2004
G
H
5. Installation procedures
43
Advertisement
Table of Contents
