Table of Contents
Advertisement
Necessary tools
•
5 mm hexagon Allen key.
•
19 mm open ended spanner.
Necessary parts
•
Four rear cladding support profiles.
•
Two profile connection parts.
•
Rear cladding plates (one per column).
•
16 M12x30 hexagon head bolts (A).
•
16 M12 plain washers (B).
•
Bag with M6x16 hexagon socket button head cap screws (H).
How to install the rear cladding ?
1. Ensure the top- , bottom- and side cladding is installed.
2. Ensure all data power cabling is realized.
3. Join two times two rear cladding support profiles together with a profile connection part as illustrated. Use four M6x16 hexagon
socket button head cap screws per connection. (image 5-57)
4. Attach the previous joined cladding support profiles horizontally to the back of the support frame as illustrated. Use therefor 16
M12x30 hexagon head bolts (A) and 16 M12 plain washers (B). (image 5-58)
5. Attach the rear cladding plates one by one to the previous installed cladding support profiles. Fasten each cladding plate with
four M6x16 hexagon socket button head cap screws (H). (image 5-59)
H
Image 5-57
Join the rear cladding support profiles together using a connection profile.
R5976773 SOLARIS LD DISPLAY 02/12/2004
5. Installation procedures
55
Advertisement
Table of Contents
