Table of Contents
Advertisement
Image 5-48
Teeth on front leg of the top and bottom cladding.
Necessary tools
5 mm hexagon Allen key.
Necessary parts
•
Top and bottom corner cladding plates.
•
Top and bottom middle cladding plates.
•
Bag with M6x16 hexagon socket button head cap screws (H).
How to install the top and bottom cladding ?
1. Place a middle cladding plate in the middle at the top of the display upon the previous installed support brackets. Ensure that the
leg with the teeth of the U-shaped cladding plate is located at the front of the display. See image 5-48.
2. Ensure that the teeth of the cladding plate are inserted into the slots at the front of the precision frame. (image 5-49)
3. Fasten the cladding plate as illustrated. Keep pushing on the front of the cladding to ensure the cladding teeth stay completely
inside the slots of the precision frames. Use a M6x16 hexagon socket button head cap screw (H) in every mounting hole of the
cladding plate. (image 5-50)
4. Install the middle bottom cladding plate in the same way as the middle top cladding plate. (image 5-51)
Note: The top and bottom middle cladding is independent of the mounting configuration of the Solaris LD display.
5. Select the appropriate corner cladding plate for each corner of the display. (image 5-52)
Note: The corner cladding plates are different for each corner of the display depending on the mounting configuration.
6. Install the corner cladding plates one by one in the same way as the previous installed middle cladding plates. (image 5-53)
1
Image 5-49
Insert the teeth of the cladding into the grooves of the precision frames.
R5976773 SOLARIS LD DISPLAY 02/12/2004
2
5. Installation procedures
51
Advertisement
Table of Contents
