Inserting Batteries Into The Infrared Remote Control Unit - Barco LC Series User Manual

2.6 Inserting batteries into the Infrared remote control unit

The batteries are not yet inserted in the remote control to avoid remote control operation in its package, result-
ing in a shorter battery lifetime.
How to install the batteries:
•
Push the cover tab with the fingernail a little backwards (as indicated by the arrow) and pull upwards the
cover top.
•
Slide the cover forwards to remove-
•
Insert two AA size batteries, making sure the polarities match the + and – marks inside the battery com-
partment.
•
Insert the lower tab of the battery cover in the gap at the bottom of the remote control, and press the cover
until it clicks in place
Note that there may be laws concerning disposal and recycling of used batteries in your
country! Please contact your local authorities to get further information!
Avoid keeping used, old batteries inside the remote control, causing leakage of internal
liquid resulting metal rust or fatal damage to the remote control unit.
Barco - LC series - R5976934 - user's manual - Revision 05 - March 2006
_____________________________________________________________________________________
2. Unpacking and installation
2-9