Table of Contents
Advertisement
3. System overview
chosen Solaris LD model, several precision frames has to be attached to the support frame to construct the complete Solaris LD
support structure. This solid support structure provides the necessary mounting holes or fixation points for attachment of the tiles,
the digitizer, the power box, the cladding, the foot and the suspension system.
Image 3-7
Left: main support frame, middle: precision frames, right: precision frames attached to support frame.
Height adjustment bracket
For easy mounting of the precision frames a height adjustment bracket needs to be mounted at the bottom rear of each precision
frame. The bottom of a precision frame can be recognized by the cut out triangle, pointing to the bottom, at the front of the precision
frame.
A
Image 3-8
A: Height adjustment bracket, B: Cut out triangle at the front, C: Bracket mounted at the rear.
3.3 Solaris LD mounting accessories
Bolts, nuts and washers
The different types of fixation parts used to assemble the Solaris LD display are kept to a minimum. Each type is packed in a bag
marked with a letter going from "A" to "J". All bags are put in one box including a hardcopy of this installation manual. Note that
the tile fixation nuts (K) are not included in this box but fixed upon the tiles at delivery. The illustration below shows all the different
fixation parts used in the Solaris LD display. The same letter labeling is used through all the illustrations in this manual.
A
B
Image 3-9
A
M12x30 hexagon head bolt.
B
M12 plain washer (D2=3xD1).
C
M12 spring lock washer.
D
M12 hexagon nut.
E
M12x130 hexagon head bolt.
F
M6x25 hexagon socket head cap screw.
G M6 hexagon flange nut.
H
M6x16 hexagon socket button head cap screw.
I
M4x16 hexagon socket head cap screw.
J
Custom plain washer for foot securing.
K
Tile fixation nut.
12
C
D
E
B
F
G
H
R5976773 SOLARIS LD DISPLAY 02/12/2004
C
I
J
K
Advertisement
Table of Contents
