Table of Contents
Advertisement
Necessary tools
5 mm hexagon Allen key.
Necessary parts
•
Four foot cladding support profiles.
•
Foot rear cladding plate.
•
Foot front cladding plate.
•
20 M6x16 hexagon socket button head cap screws (H).
How to install the foot cladding ?
1. Attach the L-shaped support brackets to the rear of the feet of the Solaris LD display as illustrated. Two brackets per foot. Fasten
each bracket with three M6x16 hexagon socket button head cap screws (H). (image 5-60)
2. Attach the foot rear cladding plate to the L-shaped support brackets as illustrated. Fasten with four M6x16 hexagon socket button
head cap screws (H). The foot rear cladding plate is recognizable by the ventilation grid. (image 5-61)
Note: Ensure to use the rearmost mounting holes in the cladding plate for fastening. The mounting holes, in the rear cladding
plate, located more at the front must be free to install the front cladding plate of the feet.
3. Install the foot front cladding plate as illustrated. The sides of the front cladding plate must slide over the sides of the rear cladding
plate. Fasten with four M6x16 hexagon socket button head cap screws (H). (image 5-62)
Image 5-60
Install foot cladding support brackets.
Image 5-61
Install foot rear cladding plate.
R5976773 SOLARIS LD DISPLAY 02/12/2004
H
H
5. Installation procedures
57
Advertisement
Table of Contents
