Conversion Of The Cpv Valve Terminal To Two Pressure Zones - Festo CPV-VI Series Manual

5. Maintenance and conversion
5.7

Conversion of the CPV valve terminal to two pressure zones

5-22
In order to convert your CPV valve terminal to two pressure
zones, you will require a separator plate (must be ordered
separately).
Please note
S When installing the CPV valve terminal, note that the
compressed air must be supplied on both sides of the
valve terminal.
S Seal non-required connections (supply or auxiliary pilot
air connections) with blind plugs.
Fit the separator plate as described in the section "Fitting
components on valve locations".
Festo P.BE-CPV-EN en 0005e