Table of Contents
Advertisement
Setup Relating to Operations From the Control Panel
(OPERATION Menu)
13-60
Chapter 13 Setup
To specify register numbers 1 to 9
1 Press the SNAPSHOT button, which lights amber.
2 Press one of the numeric keys 1 to 9.
To specify register numbers 10 to 19
1 Press the SNAPSHOT button, which lights amber.
2 Press the SHIFT button, which lights amber.
3 Press one of the numeric keys 0 to 9; the SHIFT button goes off.
To specify register numbers 20 to 99
1 Press the SNAPSHOT button, which lights amber.
2 Hold down the SHIFT button, and press the 2 numeric key; the
SHIFT button lights green.
3 Press one of the numeric keys 0 to 9.
4 To subsequently specify another register in the range 20 to 29, with
the SHIFT button lit green, press one of the numeric keys 0 to 9
again.
In step 2, press 3 to 9 in place of 2 in order to specify a register in the
range 30 to 99.
To return to the state in which one of registers 0 to 19 can be
specified, press the SHIFT button lit green, turning it off.
b) Setting the linkage of the transition type selection buttons and the
FlexiPad
Select whether or not pressing one of the WIPE, DME1, and DME2
transition type selection buttons in the transition control section of an
M/E bank causes the WIPE button or DME button in the FlexiPad of
the same M/E bank to light automatically.
MODE1: Lights automatically. (Factory default setting.)
MODE2: Does not light.
c) Setting the method of selecting the reference channel in the
numeric keypad section
Select the method of making the corresponding sub-register selection
button light green when selecting the reference channel in the numeric
keypad section.
MODE1: Hold down the SNAPSHOT button or EFF button, and
press the corresponding sub-register selection button to cause it
to light green. (Factory default setting.)
MODE2: Press a sub-register selection button which is off or lit
amber to select the corresponding sub-register as the reference
channel. To cancel the reference channel selection, press the
button lit green, turning it off.
Advertisement
Table of Contents
