Sony DVS-7250 User Manual page 99

3
If you pressed F4 or F5 in the preceding step, set the corresponding
parameters, as required.
• If you selected chroma key, make the settings in the M/E-1 CHROMA
KEY menu (see chapter 5), then return to the M/E-1 KEY 1 menu.
• If you selected pattern key, make the wipe pattern selection and
modifier settings in the M/E-1 WIPE menu (see page 4-66), then return
to the M/E-1 KEY 1 menu.
When you select a wipe pattern for the pattern key, the EDGE and
DIRECTION modifier settings in the WIPE menu become invalid. You
can make edge settings from the M/E-1 KEY 1 menu.
4
Adjust the parameter values.
When you have selected a luminance key, linear key, or clean key:
Knob Parameter
1 Clip
2 Gain
3 Density
4 Filter
When you have selected a chroma key:
Knob Parameter
3 Density
When you have selected a pattern key:
Knob Parameter
1 Size
2 Softness
3 Density
Setting
Set clip level on the key signal (–10.00 to +110.00)
Set key sharpness (0.00 to 100.00)
Set key density (0.00 to 100.00)
Select filter coefficient (1 to 5)
Setting
Set key density (0.00 to 100.00)
Setting
Set pattern size (0.00 to 100.00)
Set degree of edge softness (0.00 to 100.00)
Set key density (0.00 to 100.00)
Chapter 4 Basic Operations for Image Creation
(Continued)
4-39