Table of Contents
Advertisement
Snapshot Operations
DME Snapshot Operations
From the control panel of the switcher, you can save and recall DME
snapshots on up to four channels.
Each DME has registers for 99 snapshots, numbered 01 to 99 as on the
switcher.
To save or recall a DME snapshot
In the numeric keypad section press one of the DME 1 to DME 4 sub-register
selection buttons (see page 2-26), to select the corresponding DME.
Otherwise, the procedure is the same as when saving or recalling a switcher
snapshot.
Notes
• It is not possible to use the global channel for snapshot operations.
• It is not possible to execute key frames and recall snapshots at the same
• It is not possible to save and recall snapshots in DME-3000. Carrying out
7-14
Chapter 7 Snapshots
time.
the procedure for recalling a snapshot will recall the key frame of the
specified number.
Advertisement
Table of Contents
