Table of Contents
Advertisement
Setup Relating to Keyers, Wipes and Other Effects (EFFECT Menu)
13-32
Chapter 13 Setup
Setting
Operation
Making the chroma
Use the following procedure.
key memory
1 Press F5 (CRK MEMORY ASSIGN), to display the
settings
CHROMA KEY MEMORY ASSIGN menu.
2 Either press F1 (MEMORY SELECT) or turn knob 2 to
align the cursor with one of the six chroma key memories.
3 To assign one of the chroma key analog component
inputs 1 to 4 as the chroma key memory, press the
corresponding one of function keys F4 (1) to F7 (4).
To assign an input signal assigned to the key bus in a D1
system, hold down F8 (KEY BUS) and press the
corresponding cross-point button in the auxiliary bus
bank, or hold down F8 and turn knob 3 to select the input
signal.
To assign nothing, press F3 (OFF).
Advertisement
Table of Contents
