Table of Contents
Advertisement
Using the Program/Preset Bank
2
3
4
4-20
Chapter 4 Basic Operations for Image Creation
Select which to carry out, a background transition or a downstream key
transition, with the next transition selection buttons in the transition
control section.
• For a background transition: press the BKGD button, turning it on.
• To insert or remove downstream key 1: Press the DSK 1 button, turning
it on.
• To insert or remove downstream key 2: Press the DSK 2 button, turning
it on.
You can press two or more buttons simultaneously, turning them on.
For more details, see the section "Selecting the Next Transition" (page
4-12).
Prepare the new video.
• Select a new background, using the cross-point buttons in the PST row.
• When inserting a downstream key, select the key fill and key source
signals and make any other required settings.
For more details of key signal selection and other settings, see the
section "Basic Key Setting Operations" (page 4-36).
To switch the video instantaneously, skip to step 6. For all other
transitions, continue with step 4.
Select the transition type by pressing the corresponding transition type
selection button, turning it on.
• For a mix: press the MIX, NAM, or SUPER MIX button, turning it on.
• For a wipe or DME wipe: press one of the WIPE, DME 1, and DME 2
buttons, turning it on. For a dual DME wipe, press both of the DME 1
and DME 2 buttons simultaneously, turning them on.
For more details of transition types, see the section "Selecting the
Transition Type" (page 4-15).
Advertisement
Table of Contents
