Table of Contents
Advertisement
12
Press F10 (SAVE).
This writes the adjustment values to non-volatile memory on the output
board. The settings are now maintained by the BKDS-7161 board even
when the power is turned off and on.
13
Repeat steps 4 to 11 to make the adjustments for all outputs.
Parameter indications
In the DIAGNOSIS menu screen, in addition to the current settings of
parameters, the values saved in non-volatile memory are also shown in
parenthesis. Executing step 12, therefore, makes the values in parenthesis
the same as the current values.
Example display:
Note
Unlike the settings in the SETUP menu, the DIAGNOSIS menu settings
cannot be saved to floppy disk.
GAIN
120 (100)
Value saved in memory
Current setting
Chapter 14 DIAGNOSIS Menu Operations
14-5
Advertisement
Table of Contents
