Table of Contents
Advertisement
Mix/Effects Banks
5 Auto transition control section
Duration display: This shows the
number of frames in the transition
duration. You can set the duration
using the numeric keypad.
AUTO TRANS button: Pressing this
button carries out an auto transition of
the set duration. The transition starts
immediately, and the button lights
amber. When the transition
completes, the button goes off.
While a transition is in progress (i.e.
while the button is lit amber),
pressing the AUTO TRANS button
again pauses the transition, and the
AUTO TRANS button then lights
green. Pressing the button again in
this state resumes the transition, and
the AUTO TRANS button reverts to
amber.
CUT button: Pressing this button carries
out the transition as a cut (i.e.
instantaneously).
6 Transition indicator
This comprises 30 LEDs which show the
current status of the transition.
7 Fader lever
This is used to carry out a manual
transition.
2-10
Chapter 2 Location and Function of Parts
Advertisement
Table of Contents
