Table of Contents
Advertisement
Setup Relating to Input/Output Signals (INPUT/OUTPUT Menu)
13-16
Chapter 13 Setup
Menus accessed from the INPUT/OUTPUT menu (Continued)
Menu
Functions
Making settings relating to chroma key input
CHROMA
signals
KEYER
INPUT
• Selecting the input signal format
• Selecting the GEN LOCK mode
• Adjusting the horizontal phase of an input
signal
SWITCH-
Making settings relating to switcher output
ER
signals
OUTPUT
• Setting the phase relation between the
external sync input signal and the output
reference signal
• Selecting the output reference signal format
(The following settings must be done
separately for each selected output signal.)
• Determining use of a switcher output for
input to the DMK-7000
• Clip adjustment
(white clip and dark clip for luminance signal,
video signal clip for D2 systems, chrominance
signal clip for D1 systems)
• Adjusting the vertical blanking interval
• Selecting the bit rounding function for 10- to
8-bit conversion (D2 systems only)
• Selecting the bit rounding function for
luminance signal 10- to 8-bit conversion (D1
systems only)
• Selecting the bit rounding function for
chrominance signal 10- to 8-bit conversion
(D1 systems only)
THROU-
Making settings relating to through mode (the
GH
mode in which sync signals included in output
MODE
signals are passed through unchanged,
instead of being replaced by an internally
generated sync signal)
• Input through mode setting
• Output through mode setting
OUTPUT
Assigning switcher output signals
ASSIGN
• Selecting the switcher clean out
• Selecting the preview outputs of the switcher
M/E banks
• Defending the switcher preview outputs
• Setting the auto clean function
• Setting the auto preview function
• Setting the auto preview 2 function
Function key See page
F4 (CRK
13-20
INPUT)
F5 (SWER
13-22
OUTPUT)
F6 (THRU
13-26
MODE)
F7 (OUTPUT
13-27
ASSIGN)
Advertisement
Table of Contents
