Sony DVS-7250 User Manual page 136

Wipes
Changing the aspect ratio of the wipe pattern
Replicating the wipe pattern
Rotating the wipe pattern
Applying a modulation to the edge of the wipe pattern
To apply these modifiers, use the following procedure.
Applying modulation requires the optional BKDS-2070 Enhanced Wipe
Option
Generator Board to be installed.
1
2
4-76
Chapter 4 Basic Operations for Image Creation
• To apply the modifiers to the main pattern, in the M/E-1 WIPE menu,
select F4 (MAIN MODIFY).
• To apply the modifiers to the subsidiary pattern, in the M/E-1 WIPE
menu, select F5 (SUB MODIFY).
The MODIFY menu appears.
OFF
ASPECT MULTI1
OFF OFF
F1 F2 F3
Function key indications in the MODIFY menu
Depending on the modifiers you wish to apply, press any of F1 through
F8, turning them on, and adjust the parameters.
F1 (ASPECT): adjust the pattern aspect ratio.
Knob Parameter
1 Aspect
F2 (MULTI): use replicated patterns.
Knob Parameter
1 H Multi
2 V Multi
3 Shift
a) For the layout codes (1 to 4) see page 4-64.
F3 (OFF): do not apply any of the rotation modifiers (ANGLE,
SPEED, or MAGNITUDE).
ROTATION
ANGLE SPEED MAG MOD
F4 F5 F6
Setting
Aspect ratio (0.00 to 100.00)
Setting
Number of pattern replications horizontally (1 to 63)
Number of pattern replications vertically (1 to 63)
Replication layout (1 to 4)
H V
MOD
OFF OFF
F7 F8 F9 F10
a)