Key Frame Creation and Editing
Accessing a Register
To recall the contents of a register, use the following procedure.
1
2
3
4
5
8-6
Chapter 8 Key Frame Effects
Press the EFF button in the numeric keypad block, turning it on.
This allocates the numeric keypad block to key frame operations.
In the sub-register selection section, press the button or buttons
corresponding to the sub-register or DME channel(s) you wish to use.
Note
It is not possible to access switcher sub-registers individually.
Whichever of the four sub-register selection buttons (M/E1, M/E2,
P/P DSK, and USER) is lit, all of the switcher sub-registers are recalled.
Press the RCALL button, turning it on.
Enter the number of the register you wish to access.
• When creating a completely new effect, enter the number of an empty
register.
• To access the first empty register after the currently accessed register,
without making an explicit specification, enter a period only as the
number.
Press the ENTER button.
This accesses the specified register, and recalls its contents.