Sony DVS-7250 User Manual page 344

Setup Relating to Keyers, Wipes and Other Effects (EFFECT Menu)
Carrying out setup relating to matte generators (MATTE menu)
13-34
Chapter 13 Setup
You can use the MATTE menu for the following settings relating to the
built-in matte generator.
• Toggling the illegal color limiter function on and off
• Setting the luminance level maximum value: Toggle the luminance
level maximum value between 100 IRE and 120 IRE (D2 systems) or
100% and 107% (D1 systems).
• Setting the luminance level minimum value: Toggle the luminance
level minimum value between 0 IRE and –10 IRE (D2 systems) or 0%
and –7% (D1 systems).
To carry out these settings, use the following procedure.
1
In the EFFECT menu, press F5 (MATTE).
The MATTE menu appears.
COLOR
LIMIT
OFF
F1 F2 F3
Function key indications in the MATTE menu
2
Carry out the operation in the following table to make the required
setting.
Setting
Toggling the illegal
color limiter function
on and off
Setting the luminance
level maximum value
Setting the luminance
level minimum value
LUM LEVEL
MAX MIN
100 0
F4 F5 F6
Operation
Press F2 (COLOR LIMIT).
This toggles the setting on and off.
Press F4 (MAX).
This toggles the setting.
Press F5 (MIN).
This toggles the setting.
F7 F8 F9 F10