Table of Contents
Advertisement
5
Make the settings required for the selected transition type.
For details of the settings, see the sections on the pages indicated in the
following table.
Wipe
Super mix
DME wipe
Dual DME wipe
Transition limit
6
Use the transition control section to execute the transition.
• For a mix or wipe (gradual transition): press the AUTO TRANS button
or manipulate the fader lever, turning it on.
• For a cut (instantaneous transition): press the CUT button, turning it on.
For more details, see the section "Executing a Transition" on the next
page.
Fade-to-black
To carry out a fade-to-black, press the FADE TO BLACK button in the DSK
control section.
The FADE TO BLACK button lights amber during the transition, and
changes to red when the transition is completed.
For details of setting the fade-to-black transition rate, see the section
"Setting the Transition Rate" (page 4-23).
For details of disabling the fade-to-black function, see the section "Making
settings relating to control panel operation, screen saver and fade-to-black
function (PANEL ENABLE menu)" (page 13-64).
"Basic Operation for Wipe Settings" (4-66)
"Super Mix Settings" (page 4-18)
"DME Wipe Settings" (4-87)
"DME Wipe Settings" (4-87)
"Setting a Transition Limit" (page 4-17)
Chapter 4 Basic Operations for Image Creation
4-21
Advertisement
Table of Contents
