Menu Output Q1; Menu Output Q2 - Leuze electronic ODS 10 Manual

Level 1
Input
3.4.2

Menu Output Q1

≤he switching behavior of switching output Q1 on pin 4 is set in the Output Q1 menu.
Level 1
Output Q1
3.4.3

Menu Output Q2

≤he switching behavior of switching output Q2 on pin 5 is set in the Output Q2 menu.
≤he Output Q2 menu is only available for sensors with a second switching output Q2.
Leuze electronic
Level 2 Level 3
Input Mode
≤each
Deactivation
Activation
Level 2 Level 3
Q1 ≥pper Sw. Pt.
Q1 Lower Sw. Pt.
Notice: For the limit values of the measurement range for your sensor, see chapter 13
"≤echnical data".
Q1 Hysteresis
Q1 Light/Dark
Description
Function of the switching input on pin 5 if the supply volt-
age is applied.
≤each analog output and switching output
Switch off laser transmitter with +24 V on the
switching input
Switch on laser transmitter with +24 V on the
switching input
Description
≥pper switching point
Lower switching point
Hysteresis
Behavior of the switching output
if an object is within the taught/
configured switching distance.
• Light switching; switching
output active (high)
• Dark switching; switching
output not active (low)
ODS 10
Device description
Default
X
Default
ODS10L1.8...:
4000 mm
ODS10L1-25.8...:
12500 mm
50 mm
30 mm
Light
14