≤able 9.1:
Operating system
Computer
Graphics card
Additionally required capacity
Sensor Studio
for
device D≤M
Administrator privileges on the PC are necessary for installing
Sensor Studio
9.2
Installing
≤he installation files of the
Internet at www.leuze.com.
For subsequent updates, you can find the most recent version of the
software on the Internet at www.leuze.com.
9.2.1
Downloading configuration software
Call up the Leuze home page: www.leuze.com
Enter the type designation or part number of the device as the search term.
≤he configuration software can be found on the product page for the device under the
On delivery, the device is configured for HID operation (Human Interface Device). ≤he device
can thereby be operated directly via the Windows application.
If you would like to make other settings via the ≥SB interface, you must download the ≥SB driver
from the Leuze home page (file name
Sensor Studio
9.2.2
Installing the
NO≤ICE
First install the software!
Do not yet connect the IO-Link ≥SB master to the PC.
First install the software.
If FD≤ frame software is already installed on your PC, you do not need the
lation.
You can install the communication D≤M (IO-Link ≥SB master) and the device D≤M (IO-Link
device ODS 10) in the existing FD≤ frame.
Leuze electronic
System requirements for Sensor Studio
Windows 7
Windows 8
• Processor type: 1 GHz or higher
• ≥SB interface
• CD-ROM drive
• Main memory
• 1 GB RAM (32-bit operating system)
• 2 GB RAM (64-bit operating system)
• Keyboard and mouse or touchpad
DirectX 9 graphic device with WDDM 1.0 or higher driver
350 MB hard drive memory
and IO-Link
64 MB main memory
configuration software and IO-Link ≥SB master
Sensor Studio
FD≤ frame
Connecting to a PC – Sensor Studio
installation
configuration software must be downloaded from the
SW_CR5x_Virtual_COM_Port_Drivers...
ODS 10
Sensor Studio
.
Sensor Studio
installation
Downloads
).
Sensor Studio
tab.
instal-
35