Table of Contents
Advertisement
3.3
Indicators and operational controls
≤he device housing is provided with the following indicators and operational controls:
• OLED display
• ≤wo control buttons
• Green/red LED on the control panel
• ≤wo yellow LEDs:
• On the control panel
• On the lens cover
Sensors with a second switching output (designation: ODS10L1.8/LA6) are provided with a sec-
ond yellow LED on both the control panel and on the lens cover as switching state display for
switching output Q2.
1
3
1
2
3
4
Figure 3.2:
Indicators and operational controls
3.3.1
LED indicators
≤able 3.1:
LED
Green/red LED
PWR
Yellow LED
Switching output Q1/Q2
3.3.2
Control buttons
≤he sensor is configured via the display and control buttons. ≤he display is controlled via the control
buttons. You can make adjustments in the application via the control buttons.
•
– Scroll through the functions
•
– Enter button: select function, confirm/enter value
≤he
and
displayed via icons at the right edge of the display; see chapter 3.3.4 "Meaning of the display icons".
Navigating within the menus
≥se the navigation button
Activate the desired selection with the enter button
Leuze electronic
2
Green/red LED (PWR)
Yellow LED (Q1/Q2)
Display
Control buttons
Meaning of the LED indicators on the device housing
Color, state
Green
Orange
Red
Off
On
Off
buttons have different functions depending on the operating situation. ≤hese functions are
to move through the menu.
4
Description
Sensor ready
Warning, weak signal
No signal
No supply voltage
Object detected in the switching range
No object detected in the switching range
.
ODS 10
Device description
11
Advertisement
Table of Contents
