Diagnosis Function; Exiting Sensor Studio - Leuze electronic ODS 10 Manual

DIAGNOSIS
9.4.5 function
DIAGNOSIS
Figure 9.10:
• Information on the current device status
• Reset the device to factory settings
Sensor Studio
9.4.6 Exiting
After completing the configuration settings, close the
 Exit the program via File > Exit.
 Save the configuration settings as a configuration project on the PC.
You can open the configuration project again at later time via File > Open or via the
Wizard ( ).
Leuze electronic
function
ODS 10
Connecting to a PC – Sensor Studio
Sensor Studio
configuration software
Sensor Studio
Project
44