Leuze electronic ODS 10 Manual page 46

Display
Signal Error
Wrench icon
Down arrow
≥p arrow
Leuze electronic
Possible cause
Signal failure
Sensor defective
≤he current measurement value is
less than the lower limit of the ana-
log output
≤he current measurement value is
greater than the upper limit of the
analog output
ODS 10
Measures
If the icon is displayed continuously: con-
tact Leuze electronic customer service
(see chapter 12 "Service and support")
Change the setting for the lower limit of
the measurement range (see
chapter 3.4.4 "Analog Output menu")
Change the setting for the upper limit of
the measurement range (see
chapter 3.4.4 "Analog Output menu")
≤roubleshooting
46