Table of Contents
Advertisement
Start your PC with administrator privileges and log on.
Download the
www.leuze.com > Products > Measuring Sensors > Distance Sensors > Optical Distance Sensors >
ODS 10 > Downloads tab > Software/Drivers
Copy the file into a suitable folder on your hard drive and unpack the zip file.
Start the
SensorStudioSetup.exe
≤he Installation Wizard installs the software and places a shortcut on the desktop (
9.2.3
Installing drivers for IO-Link ≥SB master
Select the IO-Link ≥SB Master installation option and follow the instruction on the screen.
≤he Installation Wizard installs the software and places a shortcut on the desktop (
9.2.4
Connecting IO-Link ≥SB master to the PC
≤he sensor is connected to the PC via the IO-Link ≥SB master (see table 14.3.1).
Connect the IO-Link ≥SB master to the plug-in power supply unit or the mains supply.
Included in the delivery contents of the IO-Link ≥SB master is a ≥SB interconnection cable for
connecting the PC to the IO-Link ≥SB master as well as a plug-in power supply unit and a short
description.
≤he mains supply of the IO-Link ≥SB master via the plug-in power supply unit is only activated
if IO-Link ≥SB master and PC are connected via the ≥SB interconnection cable.
Connect the PC to the IO-Link ≥SB master.
1
2
3
Figure 9.1:
PC connection via the IO-Link ≥SB master
≤he wizard for searching for new hardware starts and installs the driver for the IO-Link ≥SB master on
the PC.
9.2.5
Connecting IO-Link ≥SB master to the sensor
Prerequisites:
• IO-Link ≥SB master and PC are connected via the ≥SB interconnection cable.
• IO-Link ≥SB master is connected to the mains supply with the plug-in power supply unit.
Leuze electronic
Sensor Studio
configuration software from the Internet:
file and follow the instructions on the screen.
1
IO-Link ≥SB master
Plug-in power supply unit
PC
Connecting to a PC – Sensor Studio
2
ODS 10
).
).
3
36
Advertisement
Table of Contents
